Product Categories

Contact Us

Qingdao Haifu Machinery Co.,Ltd

Contact:Mr. Max Xue

Email:Inquire@haifumachinery.com

Mobile:+86-18660207907

Fax:+86-532-86768986

News

Home > News > Content
The Advantages Of Water Jet Looms
Jul 07, 2017

  The advantages of water jet looms

  Water jet looms have the following advantages:

  1, low energy consumption, to meet the needs of high-speed weaving

  Water jet looms can meet the needs of high-speed weaving, SSJ series of water jet looms into the latitude of 2000 m / min, water jet loom compared with other looms weft speed is the highest, and the power consumption per watt is only 0.2 kg / M, is the other loom 1/5. The main power of the water jet looms is only 3KW, which greatly saves energy, to tons of bags, for example, its tons of fabric power consumption is only 180KW.

  2, a wide range of applications, can be woven high-density wire

  The water jet loom is suitable for weaving all non-absorbent fibrous fabrics and is suitable for a wide range of applications. water jet loom Mainly used in weaving polypropylene, polyethylene, synthetic fiber and other specifications of the fabric, is the latest type of weaving machinery, it can be woven high linear density flat wire.

  3, water jet loom weaving cloth more flat

  Water-jet loom weaving cloth is relatively flat, it is because the water jet loom is the use of high-pressure water weft, each weft stretch evenly, it uses steel buckle playing latitude, no weft of the curvature, bending, Quality defects, so the water jet loom cloth smooth and beautiful.

  4, easy to operate, one can take care of multiple machines

  Because the use of water spray weft, do not need a shuttle and replace the shuttle, the other operation is also convenient, water jet loom the process change is simple. As the water can eliminate static electricity, so the yarn broken rate is very small, to achieve one person to watch more than one water jet loom, saving a lot of manpower. And the diameter of the weft yarn of the water jet loom can reach 180 mm or more, which can effectively reduce the burden of 50% of the front process drawing workers when the diameter of the spindles is less than 85 mm.